Month: October 2017

Crisis 2017

thomasriepe , , ,

Bildschirmfoto 2017-10-17 um 10.13.22

Bildschirmfoto 2017-10-17 um 10.12.56

Another year has gone by and the Crisis Convention in Antwerp isn’t far off anymore . I am really looking forward to the convention, which is the best miniature and wargaming convention in Europe (that is on the continent) . There is only one bigger one in London called Salute.  The Tin Soldiers of Antwerp always do a grand job on the day and in the months before to be able to present such a marvelous show. Cudos to you Tin Soldiers!

This years free miniature is Till Eulenspiegel, sculpted by my good friend Paul Hicks.

Bildschirmfoto 2017-10-17 um 10.13.37

There are so many traders and clubs involved that I can’t mention them all here. The list of traders can be found here

The list of clubs is here.

Here are the maps with the layout of the two halls at the Hangar in Antwerp:

Bildschirmfoto 2017-10-17 um 10.15.16

Bildschirmfoto 2017-10-17 um 10.15.31

These are still subject to change!

Hope to see a lot of you there! If you are not sure if you want to go there are pictures of Crisis 2016 and Crisis2015 as a teaser for this years convention!

First test on my gaming table

thomasriepe , , , , ,

Yesterday I did the first test with my Thunderhawk on my gaming table. I test fitted the main wings, which are not completed yet. Furthermore I build a flying base from extruded polystyrene. The gunship is fitted to the stand with magnets so that different stands can be used too. When the gunship is finished it will also have retractable landing gear , which at the moment isn’t fitted yet.

FullSizeRender 31

Progress on the Thunderhawk gunship

thomasriepe , , , , ,

Over the last week and the last weekend I did a bit more on my Thunderhawk gunship for my Galactic Knights Space Marine Chapter:

Above you see some more work done to the foreword section of the main hull.

The cockpit area is done. Now follows the addition of the foreword wings:

And the detailing of the aft hull and the main engine of the main hull:

When the last details are added to the left side of the main hull the next step will be detailing the main wings with the other two engines. Then the attack wings and the rest of the armament have to be done. After that adding all the rivets and other small detail. So watch this space for more updates.

A Thunderhawk gunship for the Galactic Knights Chapter

thomasriepe , , , ,

As I have quite a few Primaris Space Marines in my army and you can only use the new repulsortank as transport I thought about getting a Thunderhawk gunship as a transport as it is the only other vehicle you can use in Warhammer 40K to get your Primaris Marines transported.

I always wanted to have one in my collection. Way back in the 1990’s I considered one too for my Space Wulf army I used to have. But the price tack at Forgeworld was just to high then and it is still today. There is no way paying 450 British pounds for a single model! So how to get on of these:

pict

There is a Facebook group called papercraft poorhammer modelling were you can get templates to build your own paper models from. As paper is, as far as I think, not sturdy enough for gaming I used the templates to build my own Thunderhawk from extruded polystyrene . I have a proxxon foam cutter which is used for architectural models and which I have used for terrain building till now. I have a few mdf additions for this machine for cutting angles and round objects from Gerard Boom. You will find him at Crisis for example.

So here is the beginning of my own Thunderhawk :

This is the main body as a basic shape.

IMG_7988

Here you see the basic wing assembly.

This are the styrodur ( extruded polystyrene )parts for the engines. On the right picture is the mdf part which helps to cut out round shapes.

Here the engines are added to the wings . All basic shapes . Fillerwork and sanding has to take place yet.

FullSizeRender 7

And this is how far I got this weekend. From start to this stage it took about 10 hours building time. Most time was used to find out how to use the templates to build with extruded polystyrene . The detail work will start in the next days. So watch this space for an update.

What I forgot to tell you , the version of the Thunderhawk I am building is no longer available at Forgeworld, they have a new slightly different Thunderhawk model now for sale.