More terrain pieces for my Vietnam project

As a break from painting miniatures and as I like building terrain as much as painting miniatures, I started to do some more terrain for my Vietnam gaming table. I decided that my jungle wasn’t dense enough so there have to be more jungle scatter pieces. There were only a few palm trees so there have to be done some more. But most important I wanted to do some bigger elephant grass patches and a landingzonye for my choppers.

So I started with some palm trees . I use the plastic stuff you can get from sign makers as offcuts. This is quite sturdy and takes glue and paint well. I hot glued the trees to this and put some filler and sand on them to define the base of the trees.

Some of the trees were just glued to a washer and a 25mm mdd base to have a smaller footprint on the table and fit between the other terrain pieces. The washer was used to make the base heavier and prevent the tree from falling over. Then I painted the bases and added plastic plants and flock like on my other jungle pieces.

here are the finished pieces:

The elephant grass test piece was done by glueing pieces of artificial grass to a plastic base , adding filler round the edges of the grass to blend it all in , adding sand and scatter and of course paint.

IMG_4542

So this looks like a small path through the grass doesn’t it?

some more pictures:

Next up my LZ ( landing zone) done like the elephant grass with a wider central free space for the choppers to land in:

IMG_4540

Some more pictures:

And all the pieces I have finished at the moment:

Next project will be a village in the jungle with rice paddies, hooches , and animal pens.